A:Â
Hello,
Please be advised that the life of the light bulbs will depend on the use of the fireplace. Light bulb replacement instructions according to the owner's manual for this model are provided below.
Light Bulb Replacement
Allow at least five (5) minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin. Light bulbs need to be replaced when you notice a dark section of the fl ame or when the clarity and detail of the log exterior disappears. There are two (2) bulbs under the log set which generate the flames and embers.
Helpful Hints
It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.
Light Bulb Requirements
Quantity of three (3) â 60 Watt chandelier or candelabra bulbs with E-12 (small) socket base, 120 Volt. Do not exceed 60 Watts per bulb.
Bulb Replacement Instructions:
- Unplug the unit from the outlet.
- Remove glass assembly.
- Reach in and turn the burnt-out bulb(s) (or all bulbs) counter-clockwise to remove.
- Replace with new bulbs.
- Fit glass assembly back in place.
- Plug in the Sahara fireplace.
Thanks for shopping Sears.