CRAFTSMAN®/MD 2-Stage Snowblower Attachment - 44" Model

$1,999.99
Item #: 71366182610
Add to cart
In-store availability - show
Please enter a valid postal code (ex. M5B2C3)
print

About this product

Product features

Great for large driveways or full properties, this Craftsman tractor-mounted snowblower will make even the largest Canadian snowfalls disappear in the blink of an eye. And easy installation ensures you can add your snowblower quickly and easily whenever you need it.

WEBCODE: W- 7161826

  • Exclusive to Sears
  • Fits most CRAFTSMAN®/MD lawn and garden tractors from 16 to 27 hp (sold separately)
  • Electric lift kit included for easy installation and use. Pre-assembled, requiring minimal installation time. After initial installation, brackets remain on tractor for fast installation. Also includes quick hitch system
  • 14" open-type serrated auger mounted on nylon bushings is very powerful and makes repairs easier if needed
  • 230º manual chute rotation from driver's seat with worm rotation, base anti-friction plastic ring
  • Blower fan can achieve speeds up to 1175 revolutions per minute can propel snow to great distances (depending on tractor engine)
  • Dependable belt drive system from tractor to blower. Auger and impeller powered by high-quality worm type gear box
  • 48" all-steel frame. Housing 16 ga. (.060") - side plates 12 ga (0.105"); 44" w. x 38" d. x 181⁄2" h.
  • Reinforced at all stress points, reversible and replaceable cutting edge, heavier duty replaceable and adjustable skid shoes
  • 1-year warranty on parts and labour; details with purchase
See more products by CRAFTSMAN®/MD

You may also like

Specifications & warranty

Design

Snowblower Type

Dual Stage

Frame

Not Applicable

Engine/Power

Engine Brand

Not Applicable

Engine Rating (CC)

Not Applicable

Drive System

Drive Belts

V-Belt type

Drive Control

Not Applicable

Input System

Width Of Cut (in.)

Not Applicable

Output System

Auger Type

Xtreme

Auger Diameter (in.)

10

Impeller Diameter (in.)

15

Chute Features

Chute Rotation

Crank

Chute Type

Steel

Remote Chute Control

Remote Chute Only / Manual Deflector

Design Features

Product depth (in.)

38.0

Product height (in.)

18.5

Product weight (lb.)

246.0

Product width (in.)

44.0

Operational Features

Hand Controls

Not Applicable

Heated Hand Grips

No

Steering

Not Applicable

Speeds

Not Applicable

Starter

Not Applicable

Slide Shoes

Steel

Yard Light

No

Tires

Tires

Not Applicable

Warranty Information

Warranty

1 Year

Ratings & reviews

Rated 3 out of 5 by from Problême avec le treuil électrique J'ai acheté en décembre 2010. Lorsque j'utilise ma souffleuse, après un certain temps, le systême de relevage électrique devient défaillant. La souffleuse redescend sans avoir passé la commande. Selon d'autre internautes, c'est la position du treuil trop proche du silencieux, (chaleur), qui endommage le treuil. J'attend des réponses pour la suite des évènements Fabrication générale de la souffleuse est très bonne et très solide.
Date published: 2011-03-02
Rated 4 out of 5 by from Great Snowblower attachment Using a Sears 28 HP tractor, wheel weights, rear tractor weights, tire chains and this snowblower turns your tractor into an unbelievable snow removal tool. Yes, this turns your tractor into a front heavy machine but buy the weights/chains and nothing will stop you in the deepest snow. There is only one bad point with it. The chute up/down is not accessible from the seat of the tractor. I purchased the electric chute kit and now I am the envy of the block! Bring on the Saskatchewan Snow!!
Date published: 2010-11-22
Rated 4 out of 5 by from Let it snow!!!!! Put this blower on a Craftsman accelerator GT5000 28HP, with wheel weights , chains and the counter balance weights on the back. Sometimes I'm amazed at what this rig can do. I found reading the instruction manual more complicated than the installation itself, but once the sub frame is installed on the tractor the blower only takes minutes to hook up or take off. If your going to buy this blower you will need the weights and chains because it is pretty heavy. I've had no problems with belts or traction and would certainly recommend this blower when put on a well equipped tractor.
Date published: 2009-12-16
Rated 4 out of 5 by from Very well-built snowblower Got this snowblower 2 years ago. It works very well, it throws the snow about 20 meters far. I didn't go with the 48" because I wanted to be sure my tractor (24HP) wasn't underpowered. Also getting the weights and tirechains is highly recommended for traction. I also put a full waterjug on top of the weights for extra weight. I would have gave 5 stars if the manual was more usefull. I'm a pretty handy D-I-Y-er, but this thing takes a rocket scientist. Holes weren't where the manual said they'd be, some steps just aren't in the manual at all. This thing was a pain to attach to the tractor the first time (mounting the bracket that holds it, + electrical) Thankfully that was only 1 time, now it just snaps on and off you go. Another thing I had problems with was the plastic bushing that holds the winch in place, it's so close to the exhaust that it melted, which left the winch unusable. This was fixed by Sears under warranty (They fixed it by using a brass bushing, took 7 weeks) Besides these minor but very annoying glitches, it's an awesome machine which is built in Canada! I plan on getting the electric chute option next winter. If the manual could be more clear, it easily would have gotten 5 stars.
Date published: 2009-09-21
  • 2015-08-03T06:15CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_CA, sid_671-000014191-700496, STG, sort_mostRecent
  • clientName_SearsCanada

Questions & answers