Double Heavy Duty Traverse Rod with 2-Way Draw

Details

Item No. 3476467_P
Item # 3476469_I
$89.99

Variations

  • Width Range: 48-84"

Product Actions

Out of Stock

Additional Information

Now you can open and close your curtains exactly the way you like. This double traverse rod allows you to hang your chosen window covering, and set it up so you either have a split draw, 1-way draw to the right or 1-way draw to the left - whatever comes most naturally to you.

  • Front-loading double brackets
  • Pulley has safety door to prevent cords from escaping
  • Steel rod with ball-bearing housing makes for a quieter traverse operation
  • Top quality nylon cording
  • Both rods have runners to allow pin hooks to be used
  • 48-84 inch - length has 20 slides; 84-156 inch - length has 38 slides
  • Reversible master carriers easily convert system to 1-way draw operation
  • Mounting hardware and instructions included for easy installation
  • Inner rod projection is 2-3 1/4 inch - ; Outer rod projection is 5 1/4-6 1/2 inch -
  • Traverse glides, 2 cord tension pulleys, wall/floor pulleys with door
Product weight (lb.) 4.47
Reference ID 624-95100-000
Exclusive To Sears No

Product width (in.) 5.25
Product depth (in.) 84.0
Product height (in.) 1.75

REVIEW SNAPSHOT®

by PowerReviews
Double Heavy Duty Traverse Rod with 2-Way Draw
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

(2 of 3 customers found this review helpful)

 
5.0

Very good dual rod for pleated drapes

By 

from Undisclosed

Site Member

Comments about Double Heavy Duty Traverse Rod with 2-Way Draw:

Just replaced my curtain rod of 35 years +. Nice curtain rod for installing two layers of drapes that require draw strings.... one pair of heavier colored drapes and one pair of sheer curtains. They work great for pleated drapes and curtains.

Displaying review 1

Back to top

 

Do you have questions about this product?

You may contact Customer Service or...

get answers from real customers and in-house experts with AnswerBox.

11 Questions | 11 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    when will it be in stock

    ?
    Asked on 10/23/2016 by jeannotlapin from Longueuil, QC, Canada

    1 answer

    • CUSTOMER CARE

      A:

      Hello jeannotlapin,

      The Double Heavy Duty Traverse Rod with 2-Way Draw is currently available in 48"-84" width range. We are sorry to inform you that we do not have a record on when we will receive the item in 84"-156" width range. Please visit our website regularly for the item's availability.

      Thank you for shopping at Sears. Have a great day!

      Answered on 10/24/2016 by Sears Canada from Toronto, ON
  • Q:

    Can I purchase this curtain rod in a wider size. I need at least 180" wide.
    Asked on 10/12/2014 by harrismap from Niagara Falls, ON, Canada

    1 answer

    • CUSTOMER CARE

      A:

      Hello Inez82,

      We are sorry to inform you that the Double Heavy Duty Traverse Rod with 2-Way Draw can only go up to 156" wide in maximum. We apologize for the inconvenience.

      Thank you for shopping at Sears. Have a great day!

      Answered on 10/13/2014 by Sears Canada from Toronto, ON
  • Q:

    grommet curtain: Can I hang grommet curtain on this curtain rod?
    Asked on 1/18/2014 by daisy1111 from ontario

    1 answer

    • CUSTOMER CARE

      A:

      Hello,

      No, we do not recommend trying to use the Double Heavy Duty Traverse Rod with 2-Way Draw with grommet panels.

      Thanks for shopping Sears and have a great day !

      Answered on 2/15/2014 by Sears Canada from Toronto, ON
  • Q:

    Replacement Parts: I need replacement sliders for this rod assembly. I found the individual sliders/eyelets the curtain hangs on but I cannot find the first slider/glide which the draw string is attached to.

    It is a metal bracket riveted to a plastic slider and this is what the draw string pulls on to open and close the curtains. the metal has broken away from the plastic slider.

    Where do I find a parts list or do I have to buy the entire assembly again?
    Asked on 4/23/2012 by WabbitHunter

    1 answer

    • CUSTOMER CARE

      A:

      Hello,

      Please be advised that Sears does not sell individual pieces for traverse rods only the entire rod itself.

      We apologize for any inconvenience.

      Thank you for choosing Sears.

      Answered on 4/25/2012 by Sears Canada from Toronto, ON
  • Q:

    Left or right draw?: When converted to a one way draw, is there a choice of left or right draw?
    Asked on 3/17/2012 by JNRC from Alberta

    1 answer

  • Q:

    Need 3" Rod Pocket (Valance) Rod over top of 2-layer, 2-way Draw Dbl Trav: Considering 243 817 235 in white for pinch sheer layer under pinch pleats in the new mushroom. Do you have any concerns with I.e. thickness and/or weight on the rods proposed below?

    Also, please confirm whether or not the products needed for over top of a 243 095 101 rod mentioned above are:
    - a 2 1/2 to 3 1/2 inch heavy-gauge rod 243 097 216, as well as,
    - an extension Pack 243 097 217

    Also, please confirm:
    - order number and quantity of pin hooks needed, and
    - IF REQUIRED, order number for extra slides
    Thank-you.
    Asked on 2/11/2012 by Barngirl from gananoque, ontario

    1 answer

    • CUSTOMER CARE

      A:

      Hello,

      The 2-layer 2-way Draw Double Traverse Rod, offered on this page, is considered a heavy-duty rod so it should be suitable for the draperies you mentioned.

      The 2 1/2 - 3 1/2'' Heavy-gauge Steel Rod projects to a maximum of 6" so this rod should be suitable for the valance provided you use the extension brackets as well.

      Thanks for shopping Sears.

      Answered on 6/29/2012 by Sears Canada from Toronto, ON
  • Q:

    Need ceiling mount parts and instructions: I ordered 2 of these traverse rods for pleated drapes & sheers... we are trying to install them but need to install the ends and centers to the ceiling as there is not enough room for the brackets if installed on the walls. Can you please let me know what parts I need and where I can get instructions -- there weren't any instructions in the rod boxes. Thank you.
    Asked on 11/6/2011 by Aprmarie from Ontario

    1 answer

    • CUSTOMER CARE

      A:

      Hello Aprmarie,

      Our supplier, Canadian Drapery Hardware Ltd., has provided the following answer to your inquiry.

      "It would indeed be suitable with a little modification. The ends of the rod are designed to be screwed directly into the ceiling, but the centre supports included are for wall mounting. The client would need to add our item # PT-105 (how many depends on how long the rod is, etc.) however."

      To order the part mentioned above, please contact the supplier directly using the following contact information.

      Customer Service: (416) 630-6900
      Email: orders@cdhltd.com

      Thank you for choosing Sears.

      Answered on 2/7/2012 by Sears Canada from Toronto, ON
  • Q:

    2-layer 2-way Draw: Are both layers able to be drawn? I need a rod that will allow the sheers to be drawn and/or the drapes. Both sets are pinch pleated using the pins. Is this a suitable product or do I require a different model? Thanks.
    Asked on 7/22/2011 by MorganToronto from Toronto, Ontario

    1 answer

    • CUSTOMER CARE

      A:

      Hello,

      Yes, both rods in the 2-layer 2-way Draw Double Traverse Rod have the runners to allow pin hooks to be used.

      Thanks for shopping Sears.

      Answered on 8/11/2011 by Sears Canada from Toronto, ON
  • Q:

    Questions about tabs: My curtains and sheers both use the pins and I wanted a double traverse that hangs both sets with the tabs/pins? The rods I see only have the front part with the tabs ....... please advise.
    Asked on 7/11/2011 by AZ30

    1 answer

    • CUSTOMER CARE

      A:

      Hello AZ30,

      Yes, both rods in the 2-layer 2-way Draw Double Traverse Rod have the runners to allow pin hooks to be used. The image shown on the website is of several styles, including some that have a curtain rod behind the traverse. The rod offered on this page is shown in the middle of the photograph. We apologize for any confusion this may have caused.

      Thanks for shopping Sears.

      Answered on 8/11/2011 by Sears Canada from Toronto, ON
  • Q:

    ceiling mount?: I need a one-way draw double traverse rod that can be mounted on the ceiling. Is this product suitable?
    Asked on 11/28/2010 by djangofan from British Columbia

    1 answer

    • CUSTOMER CARE

      A:

      Hello djangofan,

      Our supplier, Canadian Drapery Hardware Ltd., has provided the following answer to your inquiry.

      "It would indeed be suitable with a little modification. The ends of the rod are designed to be screwed directly into the ceiling, but the centre supports included are for wall mounting. The client would need to add our item # PT-105 (how many depends on how long the rod is, etc.) however."

      To order the part mentioned above, please contact the supplier directly using the following contact information.

      Customer Service: (416) 630-6900
      Email: orders@cdhltd.com

      Thanks for shopping Sears.

      Answered on 6/29/2011 by Sears Canada from Toronto, ON
Displaying questions 1-10Previous | Next »

Do you have a question about this product?